Servo Narrow-Panel Edge Bander
Built for the long edges and the end faces of narrow parts: strips from 40 mm wide, 9–60 mm thick, running at 16–23 m/min.
Narrow parts are the cheapest work to quote and the most expensive to get wrong. A 40 mm strip has no room for a fence that pushes, a roller that flattens the skin, or a trimming head that follows a spring instead of the panel.
This machine answers each of those with servo control rather than air or spring: the feeding fence, the pressing station, the rough and fine trimming heads, the four-knife corner tracking and the scraping station are all set from the screen and stored as recipes. The result is a narrow-panel machine that behaves like the wide one on the other side of the shop.
Technical data
| Model | FM490G (Servo) |
| Panel width | ≥ 40 mm |
| Panel thickness | 9 – 60 mm |
| Edge band thickness | 0.4 – 3 mm |
| Edge band width | 12 – 65 mm |
| Feed speed | 16 – 23 m/min |
| Panel lift | Electric |
| Input voltage | 380 V |
| Air pressure | 0.7 MPa |
| Total power | 25 kW |
| Machine size (L × W × H) | 8990 × 800 × 1900 mm |
Values from the FM490G technical data sheet issued for the European version.
What the machine is built to do
- Servo feeding fenceWidth position, side pressure and the avoidance path are set digitally, so thin panels are not deformed and strips do not drift off line at the infeed.
- Servo pressing stationPressing force, downstroke and timing are adjustable per band thickness, which reduces blistering on high-gloss faces and holds PUR bonds on notched profiles.
- Servo trimming, 0.01 mm stepsRough and fine trimming and the scraping station adjust in 0.01 mm steps from the screen, with 20 recipe groups stored for the band thicknesses you actually run.
- Four-knife corner trackingEach corner is tracked independently, so R corners stay true across the panel rather than following one setup for the batch.
- EVA gluing with fast-melt tankEVA glue pot with a fast-melt tank shortens heat-up and keeps the melt at working temperature through a shift.
- Double polishing and separationA separating agent is sprayed before polishing so residual glue lifts off the panel face instead of being polished into it.
Other formats
Servo Heavy-Duty Laser Edge Bander
Laser bonding with no glue line, on panels from 8 mm and strips down to 40 mm.
Double-Layer Handle-Free Edge Bander
Thirty handle-free profiles on one machine, switched from the screen with no waiting between shapes.
45° Bevel & Straight Edge Bander
The 45° bevel and the straight edge finished on the same line, plus soft-forming for wrapped profiles.
Put FM490G against your panel.
Send the thickness, width and band you run. You get a station list, the tooling and a price against your name.